Notes about my providing filters, etc. It was quite a job creating and organizing this list. It is a big job physically organizing these items, keeping track of them, and providing storage space for them. It is more of a service that I offer you than a product. Oftentimes it can take me more time to find the item than I charge for the item. It is just as much time and trouble to pack and ship a filter as it is a lens and not much less expensive to ship. It is definitely a losing segment of my business. I would gain space and time if I threw out my collection of filters. I provide these filters as a service to you. Keep this in mind for anything on my web pages. My goal is to serve my customers; income will follow.
Some filters are found on some of my other web pages. Sinar filters are found on my Sinar web page. Leitz camera filters and Canon rangefinder camera filters are found on my 35mm and Digital Camera equipment web page. Leitz enlarger filters are found on my Leitz Enlargers web page. Vintage Plaubel Makina filters and Hasselblad filters are found on my Medium Format web page. There are some filters along with some polarizing goggles on my Optics web page. There are some Linhof filters packaged with a camera outfit on my View Cameras web page. There are some 105mm filters, including a Polarizing filter and other filter holding accessories for Sinar on my Sinar web page.
CENTER FILTERS
These are variable density neutral density filters that are dense in the center and taper off to zero density towards the perimeter. They are used with wide angle lenses to even out the illumination. Transparencies made with the superwide lenses without a center filter will be unuseable if properly exposed for either the center or the corners of the len's full coverage, or for that matter somewhere in between. There is about a 3 stop fall off with a 100 degree lens. The center filters compensate for about 2 stops.
Heliopan center filter. Heliopan is owned by Schneider. Heliopan makes Schneider filters, including center filters. This 0.45 ND center filter has 67mm male threads to screw into the lens and has 86mm female threads in the front to accept filters. Schneider center filters do not have threads in the front. So, if you want to add filters to your center filter, this is your choice. Mint. $250.
4X4" gel filter holder to 77mm lens, boxed, Mint, $75
IIb adaptor, adapts 58mm lens to the above 4X4" gel filter holder, also serves as a 58mm to 77mm filter adaptor, boxed, Mint, $35
These Kodak filters are in amazing condition probably because they were so well made in the 1st place.
Kodak 4" round red filter, boxed, $75
Kodak 4X4" green filter, boxed, $75
Tiffen 4X4" Polarizer, Mint, $120
Tiffen 4X4" SOFT/FX 1, pinpoint nick near center, $40
Calumet 4X4" gel filter frame, Cardboard with sticky back, unused, 15 available, $3 each, all, $25
Unknown brand 4X4" gel filter frame, plastic, 2- sided, folds over on filter, unused, 2 for $5
Tiffen 4X4" gel filter frame, new in original package, $15 each, 9 available
Kodak 4X4" gel filter frame, new in box, $20
Phenolic 4X4" gel filter frame, rectangular donut 4X4" OD, 2 part, 3.5X3.5" ID, maybe Linhof, will work with Sinar shutter, 3 sets, $20 each.
2 part black anodized Aluminum 4X4" gel filter frame, overall dimensions about 4.625X6", Mint-, $30
Gel filters are optically clear and may be used in the image forming light path, infront of or behind your camera lens or your enlarger lens.
Kodak 6X6" gel filter, #12 medium yellow, envelope with carboard protector, Mint-, $50
Gel filters are optically clear and may be used in the image forming light path, in front of or behind your camera lens or your enlarger lens.
Kodak 5X5" gel filter, #82, sealed envelope with carboard protector, Mint, $40
Kodak 5X5" gel filter, #82B, sealed envelope with carboard protector, Mint, $40
Kodak 5X5" gel filter, #82C, sealed envelope with carboard protector, Mint, $40
Kodak 5X5" gel filter, maybe #61 dark green, envelope with carboard protector, Mint-, $30
Kodak 3X3" glass or gel filter holder, all metal, with series 8 retaining ring that is used as a mounting ring, boxed, Mint, $50. With this you may use a 3X3" glass filter and you may use the rear series 8 retaining ring to retain a series filter simultaneously.
Tiffen 3x3" glass or gel filter holder, all metal, with series 7 threads rear, series 8 threads front, boxed, Mint, $20 each, 4 available. These will accept a 3x3" glass filter and a series 8 filter simultaneously--plus, the rear series 7 threads may serve to retain a second series 7 filter at the same time.
Kodak 3x3" glass or gel filter holder, all metal, with series 8 retaining ring that is used as a mounting ring, with Kodak series 7 to series 8 adapter, with Tiffen series 6 to series 7 adapter, Ex, $60. With this, you may use a series 6, a series 7 and a series 8 filter simultaneously--plus, the rear series 6 threads may serve to retain a second series 6 filter at the same time.
Kenko technical holder with 55mm adapter, for 3x3" gel filters and 62mm screw-in filters, Ex+, $20
Kenko technical holder with 49mm adapter, for 3x3" gel filters and 62mm screw-in filters, Ex+, $20, 2 available
Calumet 3X3" gel filter frames, cardboard with sticky back, unused, 8 available, $3 each, all, $15
Virtually sold out of Kodak 3X3" gel filter frames. The only ones left are a few with filters in them.
Tiffen 3X3" gel filter frame, inner half only, 2 for $5
3X3" gel filter frame, made of 2 parts, black anodized Aluminum, T-shaped, overall dimensions about 3.125X4.375" + T arms, Mint-, $30
K&M wood filter cabinet for 3X3 gel filters in Kodak filter mounts with chart that tells you what filters to use to render given colors as white or black on ortho or panchromatic film, holds 20 filters in gel filter frames + a few filters in original envelopes, Mint-, $75, Ex, $50
Gel filters are optically clear and may be used in the image forming light path, infront of or behind your camera lens or your enlarger lens. Most of the Mint- filters appear to be unused, but opened for inspection.
Kodak 3X3" gel filter, #48 blue, sealed envelope with carboard protector, Mint, $10, 18 available
Kodak 3X3" gel filter, #48 blue, envelope with carboard protector, Mint-, $7, 1 available
Kodak 3X3" gel filter, #47B blue, only one left, in metal gel filter frame, Ex+, $20
Kodak 3X3" gel filter, #24 bright red, sealed envelope with carboard protector, Mint, $10, 2 available
Kodak 3X3" gel filter, #24 bright red, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, #25 red, sealed envelope with carboard protector, Mint, $10, 2 available
Kodak 3X3" gel filter, #25 red, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, #29 dark red, envelope with carboard protector, Mint-, $7, 2 available
Kodak 3X3" gel filter, #33, deep majenta, envelope with carboard protector, scratched, $2
Kodak 3X3" gel filter, #4 light yellow, envelope with carboard protector, Mint-, $7, 2 available
Kodak 3X3" gel filter, #8 medium yellow, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, #8 medium yellow, envelope with carboard protector, scratched, $1
Kodak 3X3" gel filter, #9, sealed envelope with carboard protector, Mint, $10, 3 available
Kodak 3X3" glass filter, G filter #15 orange, a few short light scratches, came in with the Kodak metal filter holder listed below, $10
Kodak 3X3" gel filter, #30, Majenta, green absorption, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, #38A blue-green, red absorption filter, sealed envelope with carboard protector, Mint, $10, 3 available
Kodak 3X3" gel filter, #75, sealed envelope with carboard protector, Mint, $10, 2 available
Kodak 3X3" gel filter, #75, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, #80A, envelope with carboard protector, scratched, $2
Kodak 3X3" gel filter, #85N3, sealed envelope with carboard protector, Mint, $10, 9 available
Kodak 3X3" gel filter, #85N3, envelope with carboard protector, Mint-, $7, 2 available
Kodak 3X3" gel filter, #85N6, sealed envelope with carboard protector, Mint, $10, 9 available
Kodak 3X3" gel filter, #85N6, envelope with carboard protector, Mint-, $7, available
Kodak 3X3" gel filter, #96, N.D. 0.1, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, #96, N.D. 0.2, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, #96, N.D. 0.3, envelope with carboard protector, Mint-, $7, 2 available
Kodak 3X3" gel filter, #96, N.D. 0.5, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC05B, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC10B, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC10B, envelope with carboard protector, Ex+, $4
Kodak 3X3" gel filter, CC20B, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC30B, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC05C, sealed envelope with carboard protector, Mint, $10, 2 available
Kodak 3X3" gel filter, CC10C, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC20C, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC30C, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC05Y, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC05Y, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC10Y, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC10Y, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC20Y, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC30Y, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC40Y, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC05M, carboard protector, scratched, $1
Kodak 3X3" gel filter, CC20M, envelope with carboard protector, scratched, $2
Kodak 3X3" gel filter, CC40M, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC025R, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC05R, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC10R, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC20R, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC30R, envelope with carboard protector, Mint-, $7
Kodak 3X3" gel filter, CC05G, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC10G, sealed envelope with carboard protector, Mint, $10
Kodak 3X3" gel filter, CC20G, sealed envelope with carboard protector, Mint, $10
Tiffen, CC30R, series 9, New-in-box, $60, 5 available
Tiffen, CC05R, series 9, New-in-box, $60
Tiffen, CC05C, series 9, New-in-box, $60, 3 available
Tiffen, CC50C, series 9, New-in-box, $60
Tiffen, CC30Y, series 9, New-in-box, $60, 3 available
Tiffen, CC50M, series 9, New-in-box, $60
Tiffen, CC10G, series 9, New-in-box, $60
Tiffen, CC20B, series 9, New-in-box, $60
Kodak Wratten filter, K2, #8, medisum yellow, series 9, boxed, Mint, $70, 2 available
Ednalite Duraclad coated 0-2 15G orange filter, series 9, boxed, Mint-, $70
Kodak wratten filter #82, series 9, boxed, Mint, $60
Enteco #85C filter, series 9, faded around perimeter (makes a good portrait filter as-is, such filters are even manufactured new for this purpose--but not in series 9), otherwise Mint-, $60
Nikon L39 (haze) filter, coated, series 9, Mint-, $70
Tiffen diffusion 1 series 9 filter, Mint-, $50
Tiffen Professional series 9 Pro-Mist 2 filter, Mint-, $60
Tiffen Professional series 9 Low Contrast 4 filter, Mint-, $60
Tiffen Photar 80A bluish cooling filter, series 9, Mint-, $60
Tiffen Photar 80B bluish cooling filter, series 9, Mint-, $60
Tiffen Photar 80A bluish cooling filter, series 9, Mint-, $60
Tiffen Photar 82A bluish cooling filter, series 9, Mint-, $60
Camrex 81C warming filter, series 9, fading around perimeter (this can be an advantage), otherwise clean, $60
Tiffen CC05R filter, series 9, Mint-, $50
Tiffen CC05G filter, series 9, Mint-, $50
Tiffen CC05Y filter, series 9, Mint-, $50, 2 available
Tiffen CC10Y filter, series 9, Mint-, $50, 2 available
Tiffen CC05M filter, series 9, Mint-, $50
Tiffen CC10B filter, series 9, Mint-, $50
Tiffen Photar green 1 series 9 filter, Mint-, $50
Tiffen 82 bluish cooling filter, Mint-, $50
Kodak series 9 gelatin filter frame holder, with series 9 retaining ring, will hold glass filters too, boxed, $90
Kenko technical holder with 67mm adapter, for 4x4" gel filters and 82mm screw-in filters, Ex+, $25
Tiffen series 9 lensshade, ~1.5 " tall, for normal to long lens, Mint-, $60
Harrison 82.2mm to series 9 adapter, Mint, $60
Tiffen 58.5 M9 adapter, Mint, $40
Tiffen #905 adapter, ~78mm to series 9, Ex+, $40
Tiffen, CC20B, series 8, New-in-box, $20, 8 available
Tiffen, CC10B, series 8, New-in-box, $20, 2 available
Tiffen, CC05C, series 8, New-in-box, $20, 2 available
Tiffen, CC10C, series 8, New-in-box, $20, 4 available
Tiffen, CC20C, series 8, New-in-box, $20, 4 available
Tiffen, CC50C, series 8, New-in-box, $20, 4 available
Tiffen, CC110C, series 8, New-in-box, $20, 4 available
Tiffen, CC05G, series 8, New-in-box, $20, 3 available
Tiffen, CC10G, series 8, New-in-box, $20, 5 available
Tiffen, CC20G, series 8, New-in-box, $20, 7 available
Tiffen, CC30G, series 8, New-in-box, $20, 6 available
Tiffen, CC40G, series 8, New-in-box, $20, 2 available
Kodak, CC05M, series 8, Ex+, $15
Tiffen, CC20M, series 8, New-in-box, $20
Tiffen, CC50M, series 8, New-in-box, $20, 3 available
Tiffen, CC70M, series 8, New-in-box, $20, 2 available
Tiffen, CC90M, series 8, New-in-box, $20, 2 available
Tiffen, CC110C, series 8, New-in-box, $20
Tiffen, CC10R, series 8, New-in-box, $20, 1 available
Tiffen, CC20R, series 8, New-in-box, $20, 6 available
Tiffen, CC30R, series 8, New-in-box, $20, 5 available
Tiffen, CC50R, series 8, New-in-box, $20, 2 available
Tiffen, CC20Y, series 8, New-in-box, $20, 6 available
Tiffen, CC30Y, series 8, New-in-box, $20, 4 available
Tiffen, CC40Y, series 8, New-in-box, $20, 2 available
Tiffen, CC50Y, series 8, New-in-box, $20
Tiffen, CC70Y, series 8, New-in-box, $20, 3 available
Tiffen, CC90Y, series 8, New-in-box, $20, 2 available
Tiffen, CC110Y, series 8, New-in-box, $20, 2 available
Tiffen, brown Color-Grad, series 8, New-in-box, $20, 4 available
Tiffen, blue Color-Grad, series 8, New-in-box, $20, 2 available
Kodak Pola-screen, series 8, boxed, bubbles around perimeter, otherwise Ex, $5
Enteco #85 series 8 warming color correction filter, fading around perimeter, $5
Kodak wratten filters 81A and 81B, series 8, nice old Kodak yellow and black plastic case, boxed, Mint-, $30
Tiffen series 8 FL-D filter, Mint-, $20
Tiffen series 8 FL-B filter, Mint-, $20
Tiffen Photar series 8 skylight 1A filter, Mint-, $10
Tiffen Photar series 8 skylight 1A filter, Mint-, $10
Tiffen Photar series 8 skylight 1A filter, Mint-, $10
Tiffen Photar series 8 R-6 filter, Mint-, $20
Tiffen Photar series 8 B-6 filter, Mint-, $20
Camrex series 8 cross screen filter, Mint-, $30
Tiffen Polarizer series 8 filter, Mint-, $35
Telesar series 8 diffusion filter, Mint-, $20
Tiffen Photar series 8 85 filter, Mint-, $20
Tiffen Photar series 8 82A filter, Mint-, $20
Hoya 81A series 8 filter, Mint-, $15
Tiffen Hi-Trans series 8 80B filter, Mint-, $20
Tiffen Hi-Trans series 8 85B filter, Mint-, $20
Hasselblad haze filter, 63, series 8, Mint-, $20
Graflex XL series 8 filter #85, Mint-, $15
Kodak series 8 Wratten #82C filter, Mint-, $10
Tiffen Photar series 8 close-up lens set, +1, +2, +3, boxed, Mint-, $50
Tiffen 40.5mm to series 8 adapter, $20
Tiffen 55mm to series 8 adapter, Mint-, $30
Tiffen ~57mm #821 to series 8 adapter, Mint-, $30
Tiffen 57.5mm #802 to series 8 adapter, Mint-, $30
Tiffen 58mm to series 8 adapter, name engraved, otherwise Mint-, $30
Tiffen 3x3" gel filter holder to series 8 adapter, with series 7 threads rear, series 8 threads front, boxed, Mint, $20 each, 5 available
Graflex XL series 8 retaining ring, Mint-, $20
77mm to series 8 step down ring, Ex+, $20
57 bayonet Polarizing filter, revolves, chrome finish, Japan, Ex, $45.
Tiffen 57 bay 8 adapter, Ex, $50. Allows you to use series 8 filters on Hasselblad 57 bayonet lenses. Hasselblad 63 filters are series 8 filters.
Tiffen 72 bay 8 adapter, Ex, $50. Allows you to use series 8 filters on Hasselblad 72 bayonet lenses. Hasselblad 63 filters are series 8 filters.
Tiffen 57 bay 7 adapter, Ex, $40. Allows you to use series 7 filters on Hasselblad 57 bayonet lenses.
Series 8 adapter filter cases, $30 each.
Tiffen 72 bay 8 adapter, Ex, $60. Allows you to use series 8 filters on Hasselblad 72 bayonet lenses. Hasselblad 63 filters are series 8 filters.
Tiffen 3x3" gel filter holder to series 8 adapter, with series 7 threads rear, series 8 threads front, boxed, Mint, $20 each, 5 available
77mm to series 8 step down ring, Ex+, $20
HITECH filter system HT 1037 67mm adapter, will fit series 8, boxed, Mint, $15
67mm female to 62mm male threaded step down ring, will fit series 8, Ex+, $50
See bayonet filters and accessories section also.
Ednalite coated skylight filter, cased, boxed, Mint, $10
Kodak skylight filter, Mint-, $5, 2 available
49mm to series 7 adapter, Ex+, $10
48mm to series 7 filter adapter and series 7 black anodized Aluminum round lensshade. 48mm fits a few lenses by various manutacturers and a few Leitz lenses, most notably the Thambar. $50
40.5mm to Series 6 adapter ring Tiffen #603, filter holder and lens shade, fits lenses such as Canon 50mm F1.8 and 35mm F3.2 rangefinder lenses, Ex, $40
Series IV adapter ring #41 with filter retaining ring. 2 Kodak filters. Daylight filter for type A film. Photoflood filter #80B. Cases for filters. About 16mm threads on rear of adapter ring. All Mint. $35
These fit lenses that do not have filter threads, with multiple adjustable fingers that grip the OD of the lens barrel
Tiffen 28.5mm to series 5 adapter, with filter retaining ring, $25
Tiffen 31.5mm to series 6, with filter retaining ring, $25
Kodak 1 5/16" (33mm) to series 6 adapter, with filter retaining ring, to fit the classic 203mm F7.7 Kodak Ektar view camera lens. RARE. $50
Kodak 2" or 50.5mm to series 7 adapter and/or filter holder. It is designed to be used on lenses that do not have filter threads. It clamps around the perimeter of a 2" or 50.5mm outside diameter lens. RARE. $25. If you need one of the filter retaining rings, add $20
Kodak 2 1/8" or 54mm to series 8 adapter and/or filter holder. One tooth missing. Inside lip filed down. RARE. $20. If you need a filter retaining ring, add $20
Kodak 2 7/16" or 62mm to series 8 adapter and/or filter holder. The larger they are the more RARE they are. $50. If you need a filter retaining ring, add $25
Canon adapter, slips over and clamps onto 60mm OD lenses, accepts ~67mm threaded filters. Mint-, $20. See it illustrated with a series 8 retaining ring, which, in turn, has another retaining ring screwed into it. Series 8 threads and 67mm threads are very similar and are usually interchangeable. Each of the retaining rings is an additional $20. With both retaining rings, you will be able to use 2 filters at once.
82mm filter retaining ring. Labeled "FUJINON INC 869 FR". It is just like your typical series retaining ring (in this case to hold about 82mm to 82.5mm diameter filters w/o threads). Ring has 85mm X 1mmp threads inside and out, so, of course, it will also accept 85mm screw-in filters. It fits some Schneider lenses such as the 300mm Componon. $20
HITECH filter system HT 1037 67mm adapter, will fit series 8, boxed, Mint, $20
67mm female to 62mm male threaded step down ring, will fit series 8, Ex+, $50
Canon 55mm to 55mm adaptor, black, Mint-, $15
55mm to 52mm step down ring, Ex+, $15
55mm to 58mm step up ring, Mint, $20
Tiffen MCS magnetic ring, 55mm female threads in center hole, 105mm OD, Mint, $25
"99SS Tiffen 4.5" adapter ring," rear slips over lens smaller than 99.4mm OD and is locked in place with set screws, front has about 118mm, or about 4.5" female threads, Mint-, $75
~40mm to series 7 Aluminum adaptor, Mint-, $10, 2 available
~54mm to series 7 Aluminum adaptor, Mint-, $10
~49mm to series 7 Aluminum adaptor, Mint-, $10
48mm to series 7 filter adapter. $40
~45mm to series 6 Aluminum adaptor, Mint-, $5
series 6 to series 7 Aluminum adaptor, Mint-, $5, 2 available
~40.5mm to series 6 Tiffen # 602 Aluminum adaptor, Ex+, $5
~40.9mm Ednalite to series 6 Aluminum adaptor, Mint, $5
~43mm to series 6 black anodized Aluminum adaptor, Mint-, $5
Wanted: ~35mm screw in filters in red, orange, yellow or 35mm to series adaptor
48mm Vivitar UV haze filter, Mint-, $15
48mm Polarizing filter, Mint-, 15
49mm Olympus L39 UV haze filter, Mint-, $15
49mm Olympus skylight filter, Mint-, $15, 2 available
49mm Vivitar Polarizing filter, Mint-, 10
52mm HCE Polarizing filter, Mint-, 12
52mm Vivitar FL-B filter, Mint-, $20
52mm Vivitar K2 medium yellow filter, Mint-, $15
55mm Vivitar Polarizing filter, Mint-, 12
58mm Vivitar Polarizing filter, Mint-, 15
58mm Canon 85C filter, Mint-, $15
58mm Tiffen SF-58M green 1, plastic case, Mint-, $15
58mm Tiffen SF-58M 80A filter, Mint-, 15
58mm Vivitar medium yellow, Mint-, $15
58mm Vivitar skylight, Mint-, $10
58mm Prinz medium yellow, Mint-, $12
62mm Tiffen Polarizing filter, Mint-, 15
62mm Tiffen skylight 1A filter, Mint-, $15
62mm Hoya 85B filter, Mint-, $20
62mm HCE skylight 1A filter, Mint-, $12
67mm Contax 1A MC filter, Mint-, $25
67mm Tiffen haze 1 filter, Mint-, $15
67mm Vivitar Polarizing filter, Mint-, 20
67mm Vivitar skylight 1A filter, Mint-, $15
67mm Telesar spot filter, Mint-, $20
67mm Prinz cross screen filter, Mint-, $25
72mm Tiffen 812 warming filter, Mint-, $20, 2 available
77mm Pro UV filter, Mint, $15
77mm Tiffen 812 warming filter, Mint-, $20
77mm Tiffen skylight 1A filter, Mint-, $20
77mm Samigon UV filter, Mint, $15
55mm Morris Polarizing filter, Mint-, 30
Kenko technical holder with 49mm adapter, for 3x3" gel filters and 62mm screw-in filters, Ex+, $20, 2 available
Cokin resin filter holder, for ~3.25" wide filters, 3 filter slots, 77mm threaded mount, Mint-, $20
Cokin B41 diffractor universal, plastic case, serrated ~70mm OD, Mint-, $20
Cokin B55 Star 16, plastic case, serrated ~70mm OD, Mint-, $20
Cokin 58mm lens adaptor (?), smooth 62mm OD, case, Mint, $15
Cokin 52mm lens adaptor (?), smooth 62mm OD, case, Mint-, $15
62mm lens adaptor, case, Mint, $15
B + W 77E 81A, warming, Mint-, $30
B + W 77E 81B, warming, plastic case, box, Mint, $40
B + W 72E 010 1x, UV, Mint, $30
B + W 62E 010 1x, UV, Ex, $10
B + W 39E 81B, warming, plastic case, box, Mint, $40, 2 available
Yellow filter, 2X filter factor, designed to slip over lens of about 111mm diameter, Mint-, $100
HASSELBLAD PROXAR 1, f=1m, Mint, $100 HASSELBLAD series 8 or 63mm filter, light yellow, 1.5X, Mint-, $35 HASSELBLAD bayonet 50 filters, Red, 6X, Green, 1.5X, Yellow, 1.5X, and Yellow-Green, 1.5X, fit 80mm F2.8, 120mm F5.6 Planar, etc., Ex+, $50 each
COLOR PRINTING FILTERS Color printing filters are not optically clear and should not be used in the light forming image path. Color corection gel filters are optically clear and may be used in the image forming light path.
COLOR CUBE, COLOR CALCULATOR Custom made using cyan, majenta and yellow filters, overlapping filters encompass all primary and secondary colors + clear center, greatly helps in color printing, ~3-4" diameter enclosed in cardboard frame, Ex+, $25
Color by Beseler #8916 Subtractive calculator kit complete, includes diffuser, diffuser (and filter) holder, subtractive color calculator and grey comparator, instructions, Mint-, in-box, $20
6X6" COLOR PRINTING FILTERS 6X6" square Kodak color printing acetate filters, CP2B ultraviolet cut off, each in it's original Kodak envelope with cardboard protector inside, Mint-, $12 each
6X6" square Kodak color printing acetate filters, CP05R, CP05R, CP05R, CP10R, CP10R, CP10R, CP20R, each in it's original unopened Kodak envelope with cardboard protector inside, Mint, $12 each
4 5/8"" square color printing acetate filters, CP20M, CP30M, CP40M, CP50M, CP20Y, each in it's original envelope with cardboard protector inside, Mint-, $10 each
6X6" INFRARED CUTOFF FILTERS Gel or acetate. Blue-green in color. Infrared light is heat transmitted in the form of wavelenths just like light of different colors is transmitted in the form of different wavelengths. These keep the infrared wavelenths from passing.
RAPID ACCESS 6X6" infrared cutoff filters, a product of Technology Incorporated, NEW, $80 each, 2 available.
3X3" INFRARED CUTOFF FILTERS Gel or acetate. Blue-green in color. Infrared light is heat transmitted in the form of wavelenths just like light of different colors is transmitted in the form of different wavelengths. These keep the infrared wavelenths from passing.
RAPID ACCESS 3X3" infrared cutoff filters, a product of Technology Incorporated, NEW, $20 each, 2 available.
RARE SINAR SOLAR FILTER I rented this filter out for the eclipse. The person who rented it was kind enough to allow me to post these images he took of the eclipse. Very dense glass filter. You can see very little else but the sun through this filter. Designed for use with the original Sinar swing out filter system. I have not seen another Sinar solar filter to fit the Sinar swing out filter system. Can be used with virtually any camera and lens. The image of the sun and clouds was made hand holding the filter in front of a digital SLR. Filter is slightly greater than 4" in diameter or about 103mm in diameter. Filter is about 0.088" thick or about 2.2mm thick. The filter comes with an original Sinar protective sleeve. There are a few scratches on the filter. The scratches have not shown up in any image I have made using the filter. For the photo of the sun and clouds, I had to overexpose by about 6 stops. Without the overexposure, all that would be seen would be the sun, which would be what you would want for most purposes. The photos of the eclipse at totality were made without the use of the filter because that's the way it is done. But when photographing the body of the sun you need a filter to protect your eyes and your camera. $150 8X8" COLOR PRINTING FILTERS 8X8" square Kodak color printing acetate filters, CP2B ultraviolet cut off, in it's original unopened Kodak envelope with cardboard protector inside, Mint, $20
5X5" COLOR PRINTING FILTERS Gel filters are optically clear and may be used in the image forming light path, infront of or behind your camera lens or your enlarger lens. Most of the Mint- filters appear to be unused, but opened for inspection.
5X5" square Kodak color printing acetate filters, CP20B, CP20B, in it's original unopened Kodak envelope with cardboard protector inside, Mint, $10 each
5X5" square Kodak color printing acetate filters, CP2B ultraviolet cut off, CP2B ultraviolet cut off, CP40M, CP40Y, CP10R, CP20R, CP40R, CP20B, CP20B, CP025C, CP05C, CP10C, CP20C, CP40C, in it's original Kodak envelope with cardboard protector inside, Mint-, $8 each
VARIABLE CONTRAST PRINTING FILTERS in any size up to 6X6" New Ilford filter set 0 to 5. Will work with any variable contrast paper. Specify size. $50 to $100.
5X5" POLYCONTRAST PRINTING FILTERS PC2, PC2, PC2 and PC2.5 5X5" Kodak Polycontrast acetate filters, each in it's original Kodak envelope with cardboard protector inside, Mint, $5 each
POLYCONTRAST PRINTING FILTERS for 4X5 Omega, etc. Set Polycontrast Filters in cardboard mounts with exposure factors, PC1, 1.5, 2, 2.5, 3, 3.5, 4, came in with Omega condenser head, 6 3/16 X6 3/4" OD, filter window 4 5/8" square, will not fit all heads--measure yours, Ex+, $50
ILFORD B&W PRINTING FILTERS 3.5X3.5" Ilford Multigrade filters, 11 speed matched filters from 0 to 5, with all paperwork, Mint, $20
70X70mm Ilford Multigrade filters, 11 speed matched filters from 00 to 5, with instructions, will fit many Leitz and Durst and other enlargers, New, $20
3X3" Ilford Multigrade filters, 11 speed matched filters from 00 to 5, with instructions, will fit many Leitz and Durst and other enlargers, New, $20
SAFELIGHTS and safelight filters Set of 2 ortho filters for Thomas Sodium Vapor safelight, for use with all B&W (except panchromatic materials), Mint-, $40
Super Ortho Cherry Red Safelight Shield made by Delta 1 CPM, Inc., for use with 24" white fluorescent lamp (such as the F20T12), very high quality tubes with end caps that have holes for the end connectors, case of 6, $50, or $15 each. Want 6 F20T12 white fluorescent lamps along with these sleeves?--add $24--I'll put them inside the sleeves and ship them at no extra charge. Photo is of the end of a regular white FT20T12 fluorescent bulb and of an identical bulb inside one of the safelight sleeves. I stopped at Home Depot and found that they had several fixtures available with F20T12 bulbs. They were all very compact--being designed as under cabinet fixtures for use in kitchens, etc. and would work very well in a low ceilinged darkroom. The prices varied from $13-24 for a fixture with a single bulb. These fixtures could be mounted vertically or horizontally on a wall or ceiling. SAFE FOR VARIABLE CONTRAST PAPER.
Film inspection lightbox, green filter, safe for short periods while developing, 8x10" filter size, Ex+, $150. Red screwbase safelight bulbs--suitable for ortho and all B&W (except panchromatic materials), 15 watts, 5 available, $7 each
Kodak bullet safelight, designed to screw into lamp socket, choose your filter from those 5.5" diameter filters listed below, Ex, $12, 2 available
Kodak 5.5" diameter series 00 filter, light yellow, for flashing halftones through contact screens for contrast control, Ex, $6
Kodak 5.5" diameter series 1A filter, light red, for orthochromatic materials, also good for all B&W paper except panchromatic, packaged, Mint, $8, 3 available
Brumberger 5X7" filter size safelight, on tilting, wall or ceiling or tabletop mountable base, with line cord and switch, with amber filter, red filter listed below, Mint-, $15
Kodak 5X7" series 1 filter, light red, for blue sensitive materials, and B&W papers other than panchromatic, Ex, $6
Kodak 3.25X4.75" series 3 filter, dark green, for panchromatic materials--such as film inspection during development, packaged, Mint, $3, 6 available
Kodak 3.25X4.75" series 13 filter, amber, for panchromatic B&W papers and some color papers, new-in-box, $3, 5 available
Kodak 3.25X4.75" series 0A filter, greenish yellow, packaged, Mint, $2, 6 available
Kodak #13 10X12" safelight filter, amber, for panchromatic B&W papers and some color papers, new-in-box, $30
Agfa 9 11/16" square filter for B&W papers, boxed, Ex+, $12
FILTERS, FILTER CABINETS, etc. for the graphic arts industry K&M wood filter cabinet for 3X3 gel filters in Kodak filter mounts with chart that tells you what filters to use to render given colors as white or black on ortho or panchromatic film, holds 20 filters in gel filter frames + a few filters in original envelopes, Mint-, $75, Ex, $50
8X10" Glass "International 100 lines per inch" contact screen in Mahogany box with felt protective interior, Ex, $100
Kodak 24X24" majenta 133 line square dot contact screen, boxed, Ex+, $50
K&M process lensshade to fit lens less than 85mm OD, with 3 set scres to clamp onto perimeter of lens, with 3X3" filter holder, for normal to long lenses, overall length, ~6.5", Ex-, $50
2 Kodak Pola-screen holders, model B 3.5" (approximate maximum--nominal listing on lensshade), with one imperfect Kodak Polarizing filter. Shade clamps onto perimeter of lenses of different diameters. These lens shades will clamp onto a lens up to 104mm in diameter, however, the hole in the clamp is 85mm in diameter. $150.
82mm, labeled "Japan," ~1" high, probably for normal lens, black, Ex+, $20
2 Cooper professional Hollywood square Aluminum lensshades with 3X3" filter holder for lenses less than 81mm in outside diameter, with 8 adaptors for various lenses (one fits a 14" Comercial Ektar, I know), other adaptors may be machined, clamps onto the perimeter of the lens, great lensshade for the user of 3x3" filters, Both, Ex+, $150. These 2 lensshades are illustrated along with the adapters that come with them with one adapter in use on a 30" Artar lens. This system will work with lenses such as Goerz lenses that do not have filter threads. There is some flexibility in the adapters that will allow them to fit lenses of several different but similar diameters. New adapters may be made as needed.
Tiffen Series 9 lens shades. Your choice, $50.
Custom GLENNVIEW made lens shade. The customer had a need for a specific lensshade that would allow him to use series 9 filters. He had a lensshade made by the camera manufacturer as an example of what he needed. This lensshade is made of lightweight expanded PVC with a Tiffen series 9 filter metal retaining ring at the rear. Cost of this was $250. If you need something special, most likely I can make it for you.
Tiffen 4.5" lens shades. Your choice, $80. The one on the left is collapsable and is labeled "Wide-Angle." The one on the right has been sold.
Tiffen black anodized Aluminum series 8 (67mm) round lensshade, normal to long lenses, Ex+, $20
Kodak Aluminum series 8 (67mm) round lensshade, normal to long lenses, Ex, $20
67mm collapsable rubber lensshade, normal to long lenses, Ex+, $20
67mm collapsable rubber lensshade, wideangle lenses, Ex+, $25
Vivitar 67mm collapsable rubber lensshade, normal to long lenses, Ex+, $20
Minolta MC 28mm F2.5 lens wideangle lensshade, 55mm threads, Ex, $15
58mm collapsable rubber lensshade, wide to normal lenses, Ex+, $15
58mm Tiffen collapsable rubber lensshade, wideangle lenses, boxed, Mint, $25
58mm collapsable rubber lensshade, normal to long lenses, Ex+, $15
58mm Hoya collapsable rubber lensshade, long lenses, Ex+, $15
58mm Tiffen black anodized Aluminum lensshade, normal to long lenses, Mint-, $20
58mm Tiffen black anodized Aluminum lensshade, wideangle lenses, Ex+, $40
58mm black anodized Aluminum lensshade, normal to long lenses, Mint-, $20
55mm Tiffen black anodized Aluminum round lensshade, normal to long lenses, Ex, $20
48mm to series 7 filter adapter and series 7 black anodized Aluminum round lensshade. 48mm fits a few lenses by various manutacturers and a few Leitz lenses, most notably the Thambar. $50
Olympus rubber lens hood for 35mm/F2.8, 50mm/1.8, 50mm/1.4, boxed, slips over ~51mm OD lens, Mint, $25
Fuji GS645S collapsable lensshade, 49mm, rubber torn around1/3 of perimeter where it folds, still works well, $10
Computar 49mm black anodized Aluminum wideangle lensshade, threaded inside and out for several Computar lenses including 210mm F9, 240mm F9, 270mm F9, wil work with many other lenses, Fuji GS645S, etc., Mint, $30
Tiffen series 6 (~45mm) square Aluminum lensshade, normal to long lenses, Ex, $10, 2 available
Tiffen black anodized Aluminum series 6 (~45mm) round lensshade, normal to long lenses, Ex, $10, another not by Tiffen, Ex, $10
Tiffen Aluminum series 6 (~45mm) round lensshade, normal to long lenses, Ex, $10
Kodak series 6 lenshood, boxed, Mint, $10
2 Mole Richardson #4012 dichroic Pyrex bluish filters, for the type 2921 1000W Nooklites, Ex+, $120. The Nooklites are listed on my lighting equipment list.
I have a rather large roll of Polarizing material available. It must be about 20" by 5'.
about glennview, orders,
inquiries
email to GLENNVIEW
return to the table of contents for glennview